|Place of Origin:||CHINA|
|Minimum Order Quantity:||1 SET|
|Delivery Time:||20 days|
|Payment Terms:||Western Union, T/T, L/C|
|Supply Ability:||20 sets per month|
|Test Standard:||ASTM D1266||Test Method:||Lamp Method|
|Working Units:||5 PCS||Power Consumption:||150W|
|Power Supply:||AC220V±10% 50HZ||Warranty:||1 Year|
The sulphur content tester is designed and made as per the national standard of People's Republic of China GB/T380 Standard Test Method for Sulfur Content in Petroleum Products (Lamp Method). It is used to determine the sulfur content in light oils(such as gasoline,kerosene) which the Reid vapor pressure is not higher than 600mmHg as per GB/T380.
I. Main technical features
1. This sulphur content analyzer adopts small desktop structure. It can do determination for 5 samples at a time.
2. The lamp is located in fixed seat. The height and sucking rate for each can be adjusted independently.
3. Stainless steel material. Reasonable design and easy to clean.
|1||Power supply||AC 220 V ±10%, 50 Hz|
|2||Working units||Five independent groups|
|3||Electromagnet pum||Five groups of main pumps, one group of auxiliary pump(stir pump).|
|4||Vacuum pumping adjustment||It can be continuously adjusted by a potentiometer for each group|
|5||Lamp adjustment||It can be adjusted up and down. The adjustment range is not less than 15 mm|
|6||Test tube holder||Each holder can be adjusted independently. Its adjustment range is not less than 20 mm.|
|7||Ambient temperature||-10 ℃～ 40 ℃|
|8||Relative humidity||≤ 85%|
|9||Maximum power consumption||150 W|
|10||Dimension||380mm×320mm×600mm(including test vessels)|
|1||SCI-I Sulfur Content Tester (Lamp method)||Set||1|
|2||Glass instrument for sulfur content test(Glass absorber, droplet collector, flue, burning lamp)||Set||5|
|3||Stirring tube||Piece||1||Installed already|
|5||5A fuse (Ф5 × 20)||Piece||2|
|6||Gasket for lamp (Lined in the rotation sheath of lamp to stop the lamp from moving)||Piece||5|
|7||Cotton yarn (wick)||Meter||0.5|
|10||Product warranty card||Piece||1|