Place of Origin: | China |
Brand Name: | AI |
Certification: | ISO |
Model Number: | AIC-1384 |
Minimum Order Quantity: | 1 set |
---|---|
Price: | Negotiable |
Packaging Details: | Hardboard |
Delivery Time: | 20 days |
Payment Terms: | L/C, T/T, Western Union |
Supply Ability: | 20 sets per month |
Power Supply: | AC220V /50HZ | Test Standard: | ASTM D1384 |
---|---|---|---|
Working Units: | 3 | Timing: | Digital Timer |
Temp.control: | Omron | Flow Rate Control: | Flowmeter |
Dimension: | 690*410*760mm3 | Weight: | 31KG |
Power Consumption: | 2500W | Pressure Display: | Pressure Gauge |
Introduction
The main principle of the Corrosion Tester is:
six typical metals used in the engine cooling system are processed into test pieces, weighed, connected into test piece bundles, and then completely immersed in the specified samples. At the end of the test, take out the test piece, weigh it again after cleaning, and evaluate the corrosion according to the mass change value of the corrected test piece before and after the test.
This Corrosion Tester is applicable to engine coolant and its concentrate with high boiling point and low temperature, as well as engine cooling system rust inhibitor.
Characteristic
1.The pressure stabilizing valve controls the air inlet, and the flowmeter regulates the flow rate: 100ml / min ± 10ml / min;
2.Sputtering multi channel liquid circulator, which can ensure the temperature uniformity of each point;
3.Microcomputer temperature controller, digital display, accuracy ± 0.1 ºC, PT100 sensor;
4.Digital timer, recording the test time, with alarm;
5.Sand core glass gas diffusion head;
6.6 groups of metal test pieces is supplied with Corrosion Tester , meeting the requirements of ASTM standards;
7.Safety protection device to prevent the liquid level from being too low;
8.The Corrosion Tester has 3 working units, expandable to 4-6 units;
9.Quick disassembly device of condenser pipe;
Technical specifications
1 | Applicable standards | ASTM D1384, SH/T0085 |
2 | Heating mode | electric heating pipe |
3 | Temperature control mode | digital PID temperature controller |
4 | Pressure display | Pressure gauge |
5 | Working units | 3,can extend to 4-6 |
6 | Timing method | digital timer |
7 | Pressure control | pressure stabilizing valve |
8 | Refrigeration method | low temperature ciruclating water |
9 | Flow rate control | flowmeter |
10 | Total power | 2500W |
11 | Dimension | 690*410*760mm3 |
12 | Weight | 31KG |
13 | Power supply | AC220V 50HZ |