This Fire Testing Equipment is developed base on the standard AS1530.2, test for flammability of materials. The method is applied to the testing of a thin sheet or woven material which is sufficiently pliable to be inserted into the test apparatus by hand without special softening treatment, so that it may be graded according to a flammability index.
AS1530.2 Test for flammability of materials.
1.Two parallel brass rails, light gauge angle section which is formed in length to be slightly convex, with location pin;
2.All other frames are made of stainless steel material;
4.A 533.4mm scaler is fixed to one side of the mounting frame, with 21 equally space and 25.4mm apart;
5.Two stainless steel wire alone location pin with lightly tension to a held specimen in position;
6.Ignition copper trough, with an internal dimension of 20mmx10mmx3mm, with brass support, height-adjustable.
7.AS 1530.2 Fire Testing Equipment adopts stainless steel flue and hood;
8.4 thermocouple, type K, positioned symmetrically within the flue, 570mm above the test specimen;
9.1 thermocouple, type K, positioned in the control box, monitor ambient temperature;
10.Labview software with DAQ module for temperature record and the Area (A) calculation are provided with AS 1530.2 Fire Test Equipment.
Installation requirements of AS 1530.2 Fire Testing Equipment:
||AS 1530.2 Test for flammability of materials.
||building materials or components and structures